| Payment Type: | L/C,T/T,D/P |
| Incoterm: | FOB,CIF,CFR,EXW |
| Transportation: | Ocean,Land,Express |
| Port: | Tianjin,Qingdao,Shanghai |
Model No.: ASTM A106 A53 API 5L
Standard: Bs, Gb, Astm, Jis, Din, Api
Material: 10#-45#, St35-St52, A53-A369, Q195-Q345
Section Shape: Round
Place Of Origin: China
Application: Fluid Pipe, Boiler Pipe, Hydraulic Pipe, Gas Pipe, Oil Pipe, Structure Pipe
Production Process: Hot Rolled
Certification: Bsi, Ce, Api
Special Tube: Thick Wall Pipe, Api Pipe
Whether Alloy: Is Alloy
Tolerance: ±1%
Category: Seamless Steel Pipe
Processing Service: Welding, Decoiling, Punching, Cutting, Bending
Outer Diameter: 21.3mm-660mm
Wall Thickness: 1.5mm-50mm
Length: 5.8m, 6.4m, 6m, 11.8m, 12m, or as Required
Edge Technical: Slit Edge/Mill Edge
Surface: Black, Clean, Blasting and Painting or as Requied
| Selling Units | : | Ton |
| Package Type | : | Standard Seaworthy Export Packing |
| Picture Example | : |
|
Carbon Seamless Steel Pipe / Tube
Seamless Steel Pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow - liquids and gases (fluids), slurries, powders and masses of small solids.
Hot rolled seamless Steel Pipe deformation process can be summarized as three stages: extension, perforation and finishing. Hot rolled Seamless Steel Pipes is relative to the cold-rolled, cold rolling is below the recrystallization temperature of the rolling and hot rolled is carried out at above the recrystallization temperature of the rolling. Hot rolled seamless steel pipe can damage the refinement of the crystal grains of the steel, cast microstructure of the steel ingot and eliminate the defects of the microstructure so that the the steel organization compacting, improves the mechanical properties. This improvement is reflected in the rolling direction so that the steel is no longer at a certain extent isotropic; pouring the formation of bubbles, cracks and osteoporosis, under high pressure and temperature can also be welded together.
Hot Rolled Steel Pipes (Seamless Tube) in different size, specifications, grades & thickness as per the client's requirements. The range offered by tubes is available as per the international & national standard and can be available from us at affordable prices. These pipes are used in various application industry like shipbuilding, power plants, oil and gas, automotive, sugar mills and distilleries, cement and construction industries etc.
Product Specification
| Out Diameter | 13.7mm-914mm |
| Wall Thickness | 2mm-120mm |
| Length | 2m-12m |
| Producing Standard | American ASME B36.10M, ASTM API 5L, API 5CT, Japanese JIS, German DIN, Chinese GB, BS standard |
| Steel Grade | ASTM A53, A106, A210, A252, A178, A333, A335, SAE1018, SAE1020, SAE1045 etc; API 5L PSL1: A, B, x42, x46, x52, x56, x60, x65, x70 EN S235JR, S275JR, S355JR, S355J0, S355J2 |
| Special specifications | Available according to customer's requirements and quantity. |
| End Shape | Beveled end, plain end, varnished, or adding plastic caps to protect the two ends as per customer's requirements |
| Surface treatment | Painted, Oiled, galvanized, phosphate etc |
| Usage | 1.Widely used in the mechanical treatment field, petrochemical industry, transport and construction field |
| Third party inspection | Welcome you to send a third party inspecting company (BV, SGS etc) to check the quality of our final products. |
ASTM A106 Seamless Carbon Steel Tube
ASTM A106/ASME SA106 is the standard specification for seamless Carbon Steel Pipe applied for high temperature services. It includes three grades A, B and C, and common use grade is A106 Grade B. It used in different industries not only for pipeline systems like oil and gas, water, mineral slurry transmission, but also for boiler, construction, structural purposes.
ASTM A106 Grade B pipe is equivalent to ASTM A53 Grade B and API 5L B on chemical position and mechanical properties, in general use carbon steel and yiled strength minimum 240 MPa, tensile strength 415 Mpa.
Description
1. Standards: ASTM A106 (ASME SA106)
2. Products mainly used: apply to bending, curling and similar forming process.
3. The main products of steel / steel grade: Gr.A, Gr.B, Gr.C.
4. Specifications: diameter: 10.3 to 114.3 mm thickness: 0.8 to 12 mm Length: 6 m above, and, in accordance with customer demand, supply and other specifications of steel pipe.
5. Chemical composition and mechanical properties
6. JIS Number and Corrensponding Foreign Standards
Chemical Composition And Mechanical Properties
| Grade | Chemical Compositions | |||||||||
| C | Mn | P | S | Si | Cr | Cu | Mo | Ni | V | |
| A106-A | ≤0.25 | 0.27-0.93 | ≤0.035 | ≤0.035 | ≥0.10 | ≤0.40 | ≤0.40 | ≤0.15 | ≤0.40 | ≤0.08 |
| A106-B | ≤0.30 | 0.29-1.06 | ≤0.035 | ≤0.035 | ≥0.10 | ≤0.40 | ≤0.40 | ≤0.15 | ≤0.40 | ≤0.08 |
| A106-C | ≤0.35 | 0.29-1.06 | ≤0.035 | ≤0.035 | ≥0.10 | ≤0.40 | ≤0.40 | ≤0.15 | ≤0.40 | ≤0.08 |
| Grade | Mechanical Properties | |||||||||
| Tensile Strength(Mpa) | Yield Strength(Mpa) | Elongation(%) | ||||||||
| A106-A | ≥330 | ≥205 | 30 | |||||||
| A106-B | ≥415 | ≥240 | 30 | |||||||
| A106-C | ≥485 | ≥275 | 30 | |||||||
ASTM A53 Carbon Steel Pipe & Tube
ASTM A53 (ASME SA53) carbon steel pipe is a specification that covers seamless and welded black and hot-dipped Galvanized Steel Pipe in NPS 1/8″ to NPS 26. A 53 is intended for pressure and mechanical applications and is also acceptable for ordinary uses in steam, water, gas, and air lines.
ASTM A53 seamless steel pipe chemical composition:
| Grade | Chemical Composition (%) Max. | ||||||||
| C | Mn | P | S | Cu | Ni | Cr | Mo | V | |
| A | 0.25 | 0.95 | 0.05 | 0.045 | 0.40 | 0.40 | 0.40 | 0.15 | 0.08 |
| B | 0.30 | 1.20 | 0.05 | 0.045 | 0.40 | 0.40 | 0.40 | 0.15 | 0.08 |
ASTM A53 seamless steel pipe Mechanical Properties:
| Grade | Mechanical Properties | |
| Tensile Strength (Mpa) | Yield Strength (Mpa) | |
| A | ≥48,000 (≥330) | ≥30,000 (≥205) |
| B | ≥60,000 (≥415) | ≥35,000 (≥240) |
API 5L PSL 1 / PSL 2 Chemical Composition:
| Standard | Product specification category | Steel Grade | Chemical Composite | ||||||||
| C | Mn | P | S | Si | V | Nb | Ti | CEpcm | |||
| API 5L | PSL 1 | L210 or A | ≤0.22 | ≤0.90 | ≤0.030 | ≤0.030 |
|
|
|
| ≤0.25 |
| L245 or B | ≤0.28 | ≤1.20 | ≤0.030 | ≤0.030 |
|
|
|
| ≤0.25 | ||
| L290 or X42 | ≤0.28 | ≤1.30 | ≤0.030 | ≤0.030 |
|
|
|
| ≤0.25 | ||
| L320 or X46 | ≤0.28 | ≤1.40 | ≤0.030 | ≤0.030 |
|
|
|
| ≤0.25 | ||
| L360 or X52 | ≤0.28 | ≤1.40 | ≤0.030 | ≤0.030 |
|
|
|
| ≤0.25 | ||
| L390 or X56 | ≤0.28 | ≤1.40 | ≤0.030 | ≤0.030 |
|
|
|
| ≤0.25 | ||
| L415 or X60 | ≤0.28 | ≤1.40 | ≤0.030 | ≤0.030 |
|
|
|
| ≤0.25 | ||
| PSL 2 | L245R or BR | ≤0.24 | ≤1.20 | ≤0.025 | ≤0.015 | ≤0.40 | C | C | ≤0.04 | ≤0.25 | |
| L290R or X42R | ≤0.24 | ≤1.20 | ≤0.025 | ≤0.015 | ≤0.40 | ≤0.06 | ≤0.05 | ≤0.04 | ≤0.25 | ||
| L245N or BN | ≤0.24 | ≤1.20 | ≤0.025 | ≤0.015 | ≤0.40 | C | C | ≤0.04 | ≤0.25 | ||
| L290N or X42N | ≤0.24 | ≤1.20 | ≤0.025 | ≤0.015 | ≤0.40 | ≤0.06 | ≤0.05 | ≤0.04 | ≤0.25 | ||
| L320N or X46N | ≤0.24 | ≤1.40 | ≤0.025 | ≤0.015 | ≤0.40 | ≤0.07 | ≤0.05 | ≤0.04 | ≤0.25 | ||
| L360N or X52N | ≤0.24 | ≤1.40 | ≤0.025 | ≤0.015 | ≤0.45 | ≤0.10 | ≤0.05 | ≤0.04 | ≤0.25 | ||
| L390N or X56N | ≤0.24 | ≤1.40 | ≤0.025 | ≤0.015 | ≤0.45 | ≤0.10 | ≤0.05 | ≤0.04 | ≤0.25 | ||
| L415N or X60N | ≤0.24 | ≤1,40 | ≤0.025 | ≤0.015 | ≤0.45 | ≤0.10 | ≤0.05 | ≤0.04 | Negotiate | ||
API 5L PSL 1 / PSL 2 Mechanical Properties:
| Standard | Product specification category | Steel Grade | Yield Strength | Tensile Strength |
| API 5L | PSL 1 | L210 or A | 210 | 335 |
| L245 or B | 245 | 415 | ||
| L290 or x42 | 290 | 415 | ||
| L320 or X46 | 320 | 435 | ||
| L360 or X52 | 360 | 460 | ||
| L390 or X56 | 390 | 490 | ||
| L415 or X60 | 415 | 520 | ||
| PSL 2 | L245R or BR | 245~450 | 415~760 | |
| L290R or X42R | 290~495 | 415~760 | ||
| L245N or BN | 245~450 | 415~760 | ||
| L290N or X42N | 290~495 | 415~760 | ||
| L320N or X46N | 320~525 | 435~760 | ||
| L360N or X52N | 360~530 | 460~760 | ||
| L390N or X56N | 390~545 | 490~760 | ||
| L415N or X60N | 415~565 | 520~760 |
Product Display
We can produce different sizes, thicknesses, widths and materials according to your requirements
Test Before Delivery
We will control the quality from part of material steel pipe, each pipe produced will be have it is own identify label, quality will check the chemical component and physical property and then provide material test certificate. Size dimension will be checked and show pictures to customer to guarantee all goods will be meet requirement.
Application
Carbon steel pipe and tube are used in high-pressure conditions. They are highly resistant to shock and vibration, making it ideal to transport fluids. Carbon Steel Pipes are widely used in a number of industries, such as construction material, buidlings, bridges, transporting water and sewage, oil and gas industries, boiler and condenser tubes, high-pressure applications, and chemical processing.
- Construction material / bridges
- Transporting water and sewage
- Oil and gas industries
- Boiler and condenser tubes
- High-pressure applications
- Chemical processing
Company Profile
Packaging And Transportation
1) Packaging: 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve or as customers' requirements.
2) Shipping: We have long-term cooperation with many experienced shipping companies and will find the most suitable mode of transportation for you.
3) Trade terms: FOB/CIF/CFR
4) Shipping port: Qingdao/Tianjin/Shanghai
5) Shipment: A: Length: ≤6m, loaded in 20GP Container. B: Length: ≤12m, loaded in 40GP Container.
Remark: Size of 20GP Container (inside :5898*2352*2393mm); Size of 40GP Container (inside:12032*2352*2393mm); Size of 40HQ Container (inside:12032*2352*2698mm).
6) Delivery time: Normal size: 7-15days send from warehouse directly. Special size:15-30days custom made for you.
About Us
Related Products List
Contact Us
Send Inquiry
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now